#Kreg depth gauge for free#
#Kreg depth gauge install#

If, after reviewing this, you are still needing assistance, please get in touch with the Kreg Customer Service Team.

#Kreg depth gauge for free#

If not, or if you accidentally misplaced it, you can download and print a new copy for free here. You should've received one with your Kreg Jig HD. All of these steps, plus more tips and techniques to help you build successfully with the Kreg Jig HD, are included in the Owner Manual. In situations where using a clamp is not possible, you can fasten the Drill Guide directly to the workpiece by driving a screw through the hole in the center of the guide, as shown below. The position of the Depth Collar on the drill bit does not change. Thickness Gauge measures material thickness, has built-in hex wrench Direct replacement for items included with Kreg Pocket-Hole Jig 320, 310 Also works with. For repair applications, remove the Stop Block from the Drill Guide and clamp the Guide directly to the workpiece.

The removable Stop Block allows you to use your Kreg Jig HD to repair or reinforce existing joints. With both parts clamped together, the self-tapping tip of the Kreg Jig HD Screw easily cuts through the last 1/16' of material in the first piece and forms its own pilot hole in the mating piece, drawing the joint tightly together. Note: Stopping the drill bit before it drills all the way through the workpiece eliminates splinters that have to be removed before joining it to a mating part. Fine-tune the position of the Stop Collar if necessary. With the Stop Collar resting on the Guide, there should be 1/16' (the thickness of a nickel) between the Stop Block and the tip of the drill bit.

Slide the Kreg Jig HD drill bit into the Drill Guide. These clamps do not interlock with the Kreg Jig HD.

#Kreg depth gauge install#

When using an F-style clamp or a C-clamp, simply install the Stop Block. This grabs the Face Clamp's pad so the clamp stays in place on the Kreg Jig HD as you move it from one location to another. Then, install the Stop Block by sliding the tapered keys on the Stop Block into the mating slots in the bottom of the Drill Guide. If you are using a Kreg Face Clamp, slide the large clamp pad into the T-slot recess on the back of the Drill Guide. Slide the Stop Collar into the Kreg Jig HD Drill Bit, position it 4-3/4' from the shoulder of the bit, and tighten the set screw with the included hex wrench. Easy Stop Collar Set Up using the thickness gauge/hex key combo and drill bit. Derek, To create the strongest joint possible, position the Stop Collar on your Kreg Jig HD drill bit following these three simple steps: 1. Kreg 720PRO Pocket Hole System and Accessories Build Pocket Hole Projects.